Hilton Changde, Hunan

Hotel furniture, is a hotel project, hotel project design with the indoor environment for supporting design, need to directly consider the indoor function and environmental harmony. In addition, according to the star requirements of different standards, different style requirements and different. When purchasing, we need to pay attention to five issues in addition to selecting a beautiful appearance, material material superior furniture.

 

Hotel furniture material is reasonable

 

Different hotel furniture, surface materials are different. Such as tables, chairs, cabinets legs, require the use of hardwood, more sturdy, have a strong ability to load-bearing strength, while the internal material is available in other materials. The thickness of the wardrobe legs required to reach 62.5px, too thick to appear awkward, thin easily bent deformation.

Kitchen and bathroom cabinets can not be made of fibreboard, but should use plywood, because fibreboard will swell and damage when exposed to water. For the material of the dining table, you should consider whether it is resistant to water washing.

The discovery of wood with insect eyes and drop foam indicates that the drying is not thorough. Some people in the furniture industry suggested that after checking the surface, but also open the cabinet door, drawer door to see if there is no decay inside the material, you can use your fingernail to pinch a pinch, pinch in that the material is decayed. After opening the cabinet door with the nose to smell, if the nose, stinging, tears, that the formaldehyde content in the glue is too high, will be harmful to the human body.

 

 

Wood moisture content not exceeding 12 per cent

 

Hotel furniture water content shall not exceed 12%, high water content, wood is easy to warp, deformation. General consumers to buy, no test instrument, you can take the method of hand feel, with the hand feel the bottom of the hotel furniture or inside the unpainted place, if you feel damp, then the moisture content of at least 50% or more, simply can not be used.

Some of the furniture industry suggested that the wood can be unpainted by sprinkling a little water, if the blotting slow or not blotting, indicating a high water content. This is the use of water sprinkling method, to determine whether the moisture content of furniture wood is too high.

 

 

Is the structure of the hotel furniture solid

 

Small pieces of hotel furniture, such as chairs, stools, hangers, etc. in the selection, you can drag a drag on the concrete floor, gently fall a fall, the sound is crisp, indicating that the quality is better. If the sound is hoarse, there are splitting murmurs, suggesting that the mortise and tenon combination is not tight, the structure is not firm. Writing desk, table can be shaken by hand to see if it is stable. Sofa can sit a seat, if you sit on a move on the creaking and wriggling, a shake on the shake, is a nail work, not much time.

Square tables, tables, chairs and other legs should have four triangular card, play a fixed role in the selection of tables and chairs can be turned upside down to take a look at the cloth chair can be touched by hand.

 

Whether the four legs of the hotel furniture are flat or not

 

Judge whether the four legs of the hotel furniture is flat, can be put on the ground a shake will know, some hotel furniture is only three legs to the ground. Take a look at the desktop is straight, not bowed back or collapsed waist. Desktop raised, glass plate will be put on the spin; desktop concave, glass plate put on a pressure on the broken.

Therefore, the hotel buyers need to start from the details, pay attention to check the cabinet door, drawer slits can not be too large, to talk about horizontal flat and straight, the door can not be sagging.

Veneer Hotel Furniture Tight Seams

 

Whether it is pasted wood veneer, PVC or paste pre-painted paper, we should pay attention to whether the skin is pasted flat, there is no bulging, blistering, stitching phenomenon. Check to punch the light to see, not punch the light can not see. Ashlar veneer veneer hotel furniture is easier to damage, generally only two years. As far as wood veneer is concerned, the veneer of the planed edge is better than the rotary cut.

Therefore, there are well-known furniture company people, suggested that the method of identifying the two is to look at the pattern of the wood, planed veneer wood grain straight and dense, rotary cut veneer pattern curved and sparse. Particleboard veneer hotel furniture, the ground part must be sealed, not sealed board will absorb moisture, swelling and damage. General veneer hotel furniture corners are prone to warping up, selection can be used to buckle the corners, if a buckle up, suggesting that there are problems with the glue.